Taprite Single Gauge CO2 Regulator
  • Wishlist:

    To add this product to your wish list you must Login or Register.

$ 49.99

Economy Taprite Single Gauge Regulator Now you have a choice of an American Made economy primary regulator. It comes with out the high side gauge, but includes a duckbill 5/16" barbed shut off/check valve. Low Pressure gauge reads from 0 to 60 psi. Built by Taprite, an American company.

General Regulator Information
A regulator controls the flow of CO2 gas that is under pressure. To ensure proper operation, please make sure that when in use your CO2 tank and regulator remain in an upright position. Do not physically modify the regulator in any way.

Regulators work best at room temperature. If you use your regulator in the cold it will take up to 4 hours for the adjustment to register. For example: If you are at 10 PSI and you change the pressure to 12 PSI the regulator will move to 14 or 15 PSI over the next 4 hours. Once you have found the correct pressure the regulator will work perfectly fine but it will take some trial and error to get it adjusted.