1/2 Micron Diffusion Stone

$ 11.99 (Sold Out)

Our .5 micron stone is ideal to force carbonate your kegged beer, or as an aeration stone prior to fermentation. The barb is 1/4" ID.To Use: Attach 2 feet of 1/4" tubing from the "gas in" dip tube inside the keg. (Tubing not included). You set your desired pressure on the regulator and gas gets emitted through the .5 micron...

2 Micron Diffusion Stone

$ 11.99 (Sold Out)

Use this 2 micron oxygen stone with an oxygen source or aeration pump to provide your yeast with oxygen pre-fermentation. The barb is 1/4" OD. (Note: if you are using an aeration pump, we recommend a "deep water" type for aquariums, as these will have the necessary PSI to force the air through the stone and into the wort)- 316...

4 in 1 Carboy Shield

$ 10.99 (Sold Out)

This carboy wrap is made with padded insulation and fits snuggly around all sizes of carboys. This shield will protect your carboys from light, as well as help you control your fermentation temperatures with the insulation. The padding of this shield will also help protect your carboys against breakage.

Aeration System w/ Air Pump

$ 29.99 (Sold Out)

Instead of diffusing pure oxygen into your wort this system uses filtered air. The included air-pump pushes air through an inline sanitary filter which is then dispersed into the wort through our two micron threaded stainless steel diffusion stone. The advantage of an aeration system is that you never have to buy replacement oxygen tanks. The down side is that...

Anvil Crucible™ 14 Gallon Cooling System

$ 160.00 (Sold Out)

Keeping your fermentation temperatures under control is a very important part of fermentation for optimal flavor control and quality of the finished beer. With the Anvil Cooling System, you won't be disappointed! This simple system includes virtually everything you need to keep your beer temperature closely regulated at an amazing price. Needed, but not included, is a cooler filled with...

Anvil Crucible™ 14 Gallon Leg Extensions

$ 59.00 (Sold Out)

Increases the height of your Crucible by 14.7” for easy gravity transfers into a standard keg.

Anvil Crucible™ 7 Gallon Cooling System

$ 140.00 (Sold Out)

Keeping your fermentation temperatures under control is a very important part of fermentation for optimal flavor control and quality of the finished beer. With the Anvil Cooling System, you won't be disappointed! This simple system includes virtually everything you need to keep your beer temperature closely regulated at an amazing price. Needed, but not included, is a cooler filled with...

Anvil Crucible™ 7 Gallon Leg Extensions

$ 49.00

Increases the height of your Crucible by 14.7” for easy gravity transfers into a standard keg.

Anvil Crucible™ Yeast Harvesting Kit

$ 25.00 (Sold Out)

This kit has everything you need to easily collect and harvest yeast from your Crucible conical fermentor! 1.5" Tri-Clamp 1.5" Tri-Clamp Cap 1.5" Tri-Clamp Gasket 1.5" Tri-Clamp Barb 1" Hose - 1.5 Feet

BlowTie 2 Diaphragm Spunding Valve Kit

$ 29.99 (Sold Out)

This is the complete BlowTie2 spunding valve kit, comes setup with a ball lock disconnect, ready to use out of the box. The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and...

BlowTie 2 Diaphragm Spunding Valve with Gauge

$ 19.99

The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and works much better at lower pressures. The BlowTie 2 features an integrated pressure gauge so you can quickly and easily dial in...

BlowTie Diaphragm Spunding Valve Complete Kit

$ 34.99

With this complete kit you'll be ready to use the Blow Tie Spunding Valve right out of the box. The BlowTie is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and works much better at lower pressures....

Carboy Cap - 3, 5, 6 Gallon Carboys

$ 2.49

These little guys are incredibly functional! Made out of rubber, these carboy caps can different size blow off tubing, hold a racking cane during transfers, fit an airlock and a blow off tube just in case, the possibilities are endless.  For use with our 3, 5 or 6 gallon glass carboys with smooth necks.TIP: Carboy hoods are exceptionally useful for blowoff tubes....

Carboy Cap - 6.5 Gallon Carboys

$ 2.49

These little guys are incredibly functional! Made out of rubber, these carboy caps can different size blow off tubing, hold a racking cane during transfers, fit an airlock and a blow off tube just in case, the possibilities are endless.  For use with our 6.5 gallon glass carboys..TIP: Carboy hoods are exceptionally useful for blowoff tubes. Just add 3' of 1/2"...

Carboy Handle - 3, 5, 6 Gallon Carboys

$ 6.99

These carboy carrying handles are a fantastic, economical, way to move your carboys around.  A six gallon carboy full of beer can weigh over 60 pounds, these metal handles make moving that heavy carboy around much easier and safer. Simple installation using a single wing nut and metal bolt. This handle will fit our 3, 5 and 6 gallon glass...