1 Gallon Glass Jug

$ 7.99

One gallon jugs are Ideal for making kombucha, small batch fermentation and food fermentation.

1 Gallon Widemouth Glass Jug

$ 5.49

One gallon wide mouth jugs are Ideal for making kombucha, small batch fermentation and food fermentation.

1/2 Micron Diffusion Stone

$ 11.99 (Sold Out)

Our .5 micron stone is ideal to force carbonate your kegged beer, or as an aeration stone prior to fermentation. The barb is 1/4" ID.To Use: Attach 2 feet of 1/4" tubing from the "gas in" dip tube inside the keg. (Tubing not included). You set your desired pressure on the regulator and gas gets emitted through the .5 micron...

1000 ml Erlenmeyer Flask

$ 15.99

All of our flasks are made from borosilicate type glass which is nice because they can be transferred directly from heat to ice and not crack like normal glass. (We do not recommend the use of an electric element. If this cannot be avoided, we recommend using a larger pot as a hot water bath on the stove.)Great Flask for...

1000 ml Reagent Bottle

$ 15.99

This is a super cool bottle for making yeast starter wort. Mix DME and water to make your wort and then boil in the microwave with the cap off. Remove from microwave, thread on the cap while still hot, and place in refrigerator. Store the wort till you need it.   When you are ready to make a starter remove...

2 Gallon Fermentation Bucket ONLY

$ 7.99

2 Gallon fermenting bucket, good for beer or wine. Perfect size for test batches or 1 gallon brews. This bucket is made of food grade plastic. This does not include the lid.

2 Gallon Fermentation Bucket w/ Lid

$ 11.98

2 Gallon fermenting bucket, good for beer or wine. Perfect size for test batches or 1 gallon brews. This bucket is made of food grade plastic. Price includes drilled and grommeted lid.

2 Micron Diffusion Stone

$ 11.99 (Sold Out)

Use this 2 micron oxygen stone with an oxygen source or aeration pump to provide your yeast with oxygen pre-fermentation. The barb is 1/4" OD. (Note: if you are using an aeration pump, we recommend a "deep water" type for aquariums, as these will have the necessary PSI to force the air through the stone and into the wort)- 316...

2000 ml Erlenmeyer Flask

$ 21.99

All of our flasks are made from borosilicate type glass which is nice because they can be transferred directly from heat to ice and not crack like normal glass. (We do not recommend the use of an electric element. If this cannot be avoided, we recommend using a larger pot as a hot water bath on the stove.)Great Flask for...

3 Gallon Italian Glass Carboy

$ 39.99

Your basic, every day glass carboy with extra thick glass walls made in Italy. The 3 gallon size is great for meads, overflow product or splitting up batches. Fits a #7 stopper, small universal bung or carboy hood. Dimensions:Height: 16.75 inchesWidth: 9 inches

3000 ml Erlenmeyer Flask

$ 35.99

All of our flasks are made from borosilicate type glass which is nice because they can be transferred directly from heat to ice and not crack like normal glass. (We do not recommend the use of an electric element. If this cannot be avoided, we recommend using a larger pot as a hot water bath on the stove.)Great Flask for...

4 in 1 Carboy Shield

$ 10.99 (Sold Out)

This carboy wrap is made with padded insulation and fits snuggly around all sizes of carboys. This shield will protect your carboys from light, as well as help you control your fermentation temperatures with the insulation. The padding of this shield will also help protect your carboys against breakage.

5 Gallon Italian Glass Carboy

$ 49.99

Your basic, every day glass carboy with extra thick glass walls made in Italy. The 5 gallon size is great for long term secondary fermentation, especially with our beer ingredient kits. Fits a #7 stopper, small universal bung or carboy hood.   Dimensions:Height: 19.25 inchesWidth: 10.75 inches

500 ml Erlenmeyer Flask

$ 12.99

All of our flasks are made from borosilicate type glass which is nice because they can be transferred directly from heat to ice and not crack like normal glass. (We do not recommend the use of an electric element. If this cannot be avoided, we recommend using a larger pot as a hot water bath on the stove.) Erlenmeyer flasks...

5000 ml Erlenmeyer Flask

$ 59.99

All of our flasks are made from borosilicate type glass which is nice because they can be transferred directly from heat to ice and not crack like normal glass. (We do not recommend the use of an electric element. If this cannot be avoided, we recommend using a larger pot as a hot water bath on the stove.)Great Flask for...

6 Gallon Italian Glass Carboy

$ 59.99

Your basic, every day glass carboy with extra thick glass walls made in Italy. The 6 gallon size is great for long term secondary fermentation, especially for our wine ingredient kits. Fits a #7 stopper, small universal bung or carboy hood.   Dimensions:Height: 22 inchesWidth: 10.75 inches

6.5 Gallon Fermentation Bucket ONLY

$ 13.99

This 6.5 gallon bucket is made from food grade plastic and works perfectly for fermenting 5 gallon batches. This bucket has one gallon volume markings printed on the side. Markings go up to 5 gallons, total volume filled to the top of the bucket is 6.5 gallons.

6.5 Gallon Fermentation Bucket w/ GROMMETD LID

$ 18.99

This 6.5 gallon bucket is made from food grade plastic and works perfectly for fermenting 5 gallon batches. This bucket has one gallon volume markings printed on the side. Markings go up to 5 gallons, total volume filled to the top of the bucket is 6.5 gallons. Comes with a drilled and grommeted lid to fit an airlock.

6.5 Gallon Italian Glass Carboy

$ 69.99

Your basic, every day glass carboy with extra thick glass walls made in Italy. The 6.5 gallon size is great for primary fermentation of 5 gallon batches as there is plenty of head space to avoid blow-off during fermentation. Fits a #7 stopper, small universal bung or carboy hood.   Dimensions:Height: 22 inchesWidth: 10.75 inches

7.9 Gallon Vino Vessel Fermenting Bucket ONLY

$ 15.99

This 7.9 gallon bucket is made from food grade plastic and works perfectly for fermenting 6 gallon batches of wine or beer. This bucket has one gallon volume markings printed on the side. Total volume of the bucket is 7.9 gallons. This price does not include the lid.

7.9 Gallon Vino Vessel Fermenting Bucket w/ Lid

$ 21.99

This 7.9 gallon bucket is made from food grade plastic and works perfectly for fermenting 6 gallon batches of wine or beer. This bucket has one gallon volume markings printed on the side. Total volume of the bucket is 7.9 gallons. This bucket comes with a drilled and grommeted lid. The lid also has a heavy duty gasket for an air tight seal...

Aeration System w/ Air Pump

$ 29.99 (Sold Out)

Instead of diffusing pure oxygen into your wort this system uses filtered air. The included air-pump pushes air through an inline sanitary filter which is then dispersed into the wort through our two micron threaded stainless steel diffusion stone. The advantage of an aeration system is that you never have to buy replacement oxygen tanks. The down side is that...

Airlock - 3 Piece Style

$ 0.99

This style airlock works well for both carboys and buckets, for beer and wine. These airlocks show less bubbles than the s style airlocks, but they do break down easily to clean. These airlocks can be used multiple times. 

Airlock - S Style Twin Bubble

$ 0.99

The advantage of this type of airlock is that they do have a smaller chamber so you can more closely observe the CO2 rising and therefore the rate of fermentation. They are also handy when you are cooling a beer as there is less chance of sucking airlock water back into the fermentation. The down side is that they cannot...

Anvil Carboy Cooling System

$ 105.00 (Sold Out)

Temperature control is a very important part of fermentation for optimal flavor and control and quality of the finished beer. With the ANVIL cooling system, you won't be disappointed. This simple system includes virtually everything you need to keep your beer temperature closely regulated at an amazing price. Needed, but not included, is a cooler filled with water and ice,...

Anvil Crucible™ 14 Gallon Cooling System

$ 160.00 (Sold Out)

Keeping your fermentation temperatures under control is a very important part of fermentation for optimal flavor control and quality of the finished beer. With the Anvil Cooling System, you won't be disappointed! This simple system includes virtually everything you need to keep your beer temperature closely regulated at an amazing price. Needed, but not included, is a cooler filled with...

Anvil Crucible™ 14 Gallon Leg Extensions

$ 59.00 (Sold Out)

Increases the height of your Crucible by 14.7” for easy gravity transfers into a standard keg.

Anvil Crucible™ 7 Gallon Cooling System

$ 140.00 (Sold Out)

Keeping your fermentation temperatures under control is a very important part of fermentation for optimal flavor control and quality of the finished beer. With the Anvil Cooling System, you won't be disappointed! This simple system includes virtually everything you need to keep your beer temperature closely regulated at an amazing price. Needed, but not included, is a cooler filled with...

Anvil Crucible™ 7 Gallon Leg Extensions

$ 49.00

Increases the height of your Crucible by 14.7” for easy gravity transfers into a standard keg.

Anvil Crucible™ Conical Fermentor - 14 Gallon

$ 325.00 (Sold Out)

Looking to ferment like the Pro’s? The new ANVIL Crucible™ Conical Fermentor is the hands-down best value in a stainless steel conical fermentor on the market. The rotating racking arm and large pro-style tri-clamp bottom dump will have you racking crystal clear beer and harvesting yeast like a pro! Let the Crucible™ be the showpiece of YOUR brewery! Available in 7 gal and...

SALE

Anvil Crucible™ Conical Fermentor - 7 Gallon

$ 309.00 $ 270.00

Looking to ferment like the Pro’s? The new ANVIL Crucible™ Conical Fermentor is the hands-down best value in a stainless steel conical fermentor on the market. The rotating racking arm and large pro-style tri-clamp bottom dump will have you racking crystal clear beer and harvesting yeast like a pro! Let the Crucible™ be the showpiece of YOUR brewery! Available in 7 gal and...

Anvil Crucible™ Yeast Harvesting Kit

$ 25.00 (Sold Out)

This kit has everything you need to easily collect and harvest yeast from your Crucible conical fermentor! 1.5" Tri-Clamp 1.5" Tri-Clamp Cap 1.5" Tri-Clamp Gasket 1.5" Tri-Clamp Barb 1" Hose - 1.5 Feet

Anvil SS Bucket Fermentor Cooling System (7.5 Gallon)

$ 129.99 (Sold Out)

Temperature control is a very important part of fermentation for optimal flavor control and quality of the finished beer. With the ANVIL cooling system, you won't be disappointed. This simple system includes virtually everything you need to keep your beer temperature closely regulated at an amazing price. Needed, but not included, is a cooler filled with water and ice, or...

SALE

Anvil Stainless Fermentor - 7.5 Gallon

$ 169.00 $ 145.00

The Stainless Bucket Fermentor is the perfect fermentation vesselfor 5 gallon batches. The small design enables it to easily fit inside a refrigerated unit. FEATURES:• 304 Stainless Steel.• Coned Bottom.• Embossed Level Markings.• Rotating Racking Arm.• Includes Ball Valve, Air-Lock, and Stopper.• Liquid Crystal Thermometer DIMENSIONS:Height - 19.5" to top of lid (Add 6.25" for airlock and stopper)Width - 16.5"...

Blichmann Fermenator - 14.5 Gallon Conical w/ NPT Fittings

$ 639.99

Worried about pesky bacteria hiding in the cracks of welds in your conical fermentor? Or the sort of porosity you find in all welds, which can cause leaks? The Fermenator™ from Blichmann Engineering™ is the only weld-free interior fermentor on the market! Everything that touches your beer is heavy-gauge stainless steel or FDA-approved silicone. And the Fermenator's™ surface where the fittings penetrate are...

Blichmann Fermenator - 14.5 Gallon Conical w/ Tri-Clamp Fittings

$ 869.99

Worried about pesky bacteria hiding in the cracks of welds in your conical fermentor? Or the sort of porosity you find in all welds, which can cause leaks? The Fermenator™ from Blichmann Engineering™ is the only weld-free interior fermentor on the market! Everything that touches your beer is heavy-gauge stainless steel or FDA-approved silicone. And the Fermenator's™ surface where the fittings penetrate are...

Blichmann Fermenator - 27 Gallon Conical w/ NPT Fittings

$ 849.99

Worried about pesky bacteria hiding in the cracks of welds in your conical fermentor? Or the sort of porosity you find in all welds, which can cause leaks? The Fermenator™ from Blichmann Engineering™ is the only weld-free interior fermentor on the market! Everything that touches your beer is heavy-gauge stainless steel or FDA-approved silicone. And the Fermenator's™ surface where the fittings penetrate are...

Blichmann Fermenator - 27 Gallon Conical w/ Tri-Clamp Fittings

$ 1,089.99

Worried about pesky bacteria hiding in the cracks of welds in your conical fermentor? Or the sort of porosity you find in all welds, which can cause leaks? The Fermenator™ from Blichmann Engineering™ is the only weld-free interior fermentor on the market! Everything that touches your beer is heavy-gauge stainless steel or FDA-approved silicone. And the Fermenator's™ surface where the fittings penetrate are...

Blichmann Fermenator - 42 Gallon Conical w/ NPT Fittings

$ 1,299.99

Worried about pesky bacteria hiding in the cracks of welds in your conical fermentor? Or the sort of porosity you find in all welds, which can cause leaks? The Fermenator™ from Blichmann Engineering™ is the only weld-free interior fermentor on the market! Everything that touches your beer is heavy-gauge stainless steel or FDA-approved silicone. And the Fermenator's™ surface where the fittings penetrate are...

Blichmann Fermenator - 42 Gallon Conical w/ Tri-Clamp Fittings

$ 1,399.99

Worried about pesky bacteria hiding in the cracks of welds in your conical fermentor? Or the sort of porosity you find in all welds, which can cause leaks? The Fermenator™ from Blichmann Engineering™ is the only weld-free interior fermentor on the market! Everything that touches your beer is heavy-gauge stainless steel or FDA-approved silicone. And the Fermenator's™ surface where the fittings penetrate are...

Blichmann Fermenator - 7 Gallon Conical w/ NPT Fittings

$ 599.99

Worried about pesky bacteria hiding in the cracks of welds in your conical fermentor? Or the sort of porosity you find in all welds, which can cause leaks? The Fermenator™ from Blichmann Engineering™ is the only weld-free interior fermentor on the market! Everything that touches your beer is heavy-gauge stainless steel or FDA-approved silicone. And the Fermenator's™ surface where the fittings penetrate are...

Blichmann Fermenator - 7 Gallon Conical w/ Tri-Clamp Fittings

$ 824.99

Worried about pesky bacteria hiding in the cracks of welds in your conical fermentor? Or the sort of porosity you find in all welds, which can cause leaks? The Fermenator™ from Blichmann Engineering™ is the only weld-free interior fermentor on the market! Everything that touches your beer is heavy-gauge stainless steel or FDA-approved silicone. And the Fermenator's™ surface where the fittings penetrate are...

BlowTie 2 Diaphragm Spunding Valve Kit

$ 29.99 (Sold Out)

This is the complete BlowTie2 spunding valve kit, comes setup with a ball lock disconnect, ready to use out of the box. The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and...

BlowTie 2 Diaphragm Spunding Valve with Gauge

$ 19.99

The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and works much better at lower pressures. The BlowTie 2 features an integrated pressure gauge so you can quickly and easily dial in...

BlowTie Diaphragm Spunding Valve Complete Kit

$ 34.99

With this complete kit you'll be ready to use the Blow Tie Spunding Valve right out of the box. The BlowTie is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and works much better at lower pressures....

Brew Belt Fementor Heater

$ 24.99

The Brewer's Best / Vintner's Best Brew Belt will help you maintain a constant brewing temperature of 68-75 F for all of your fermenting beverages (beer wort, wine must). Environments in your home may not be ideal for keeping your fermenter at the perfect temperature. The Brew Belt is here to help. It will maintain a constant temperature. Warning: using...

Carboy #6.5 Stopper - Stainless Thermowell

$ 24.99 (Sold Out)

This carboy thermowell is used in conjunction with the Ranco Digital Temp Controller to more accurately regulate internal temperature during fermentation. It is exceptionally useful during the start of fermentation when the lag between ambient temperature in the refrigerator and actual temperature in the carboy can vary greatly. Now you can keep your beer or wine within one degree of the...

Carboy Cap - 3, 5, 6 Gallon Carboys

$ 2.49

These little guys are incredibly functional! Made out of rubber, these carboy caps can different size blow off tubing, hold a racking cane during transfers, fit an airlock and a blow off tube just in case, the possibilities are endless.  For use with our 3, 5 or 6 gallon glass carboys with smooth necks.TIP: Carboy hoods are exceptionally useful for blowoff tubes....