SALE

FermZilla Conical Fermenter - 7.1 gal. / 27 L

$ 174.98 $ 149.99

The new and improved FermZilla in 27L brought to you by the critical minds and engineers behind the original Fermentasaurus Gen 1. Although the original Fermentasaurus was revolutionary at the time of its conception, there's always room for improvement. This is partly due to the strong community of Fermentasaurus users who have helped push for an improved conical unitank. The...

FermZilla All Rounder Fermenter - 7.9 gal. / 30 L

$ 78.99

The FermZilla 30L All Rounder is the perfect fermentation vessel that can be used for fermenting under pressure, carbonating, and dispensing. It's far more capable than the FermZilla Flat bottom but it's less complicated and less expensive than the FermZilla Conical fermenter. The key differences are that the All Rounder can be pressurized, unlike the Flat Bottom, but it does...

Anvil Crucible™ Conical Fermentor - 7 Gallon

$ 309.00 (Sold Out)

Looking to ferment like the Pro’s? The new ANVIL Crucible™ Conical Fermentor is the hands-down best value in a stainless steel conical fermentor on the market. The rotating racking arm and large pro-style tri-clamp bottom dump will have you racking crystal clear beer and harvesting yeast like a pro! Let the Crucible™ be the showpiece of YOUR brewery! Available in 7 gal and...

Anvil Stainless Fermentor - 7.5 Gallon

$ 169.00

The Stainless Bucket Fermentor is the perfect fermentation vesselfor 5 gallon batches. The small design enables it to easily fit inside a refrigerated unit. FEATURES:• 304 Stainless Steel.• Coned Bottom.• Embossed Level Markings.• Rotating Racking Arm.• Includes Ball Valve, Air-Lock, and Stopper.• Liquid Crystal Thermometer DIMENSIONS:Height - 19.5" to top of lid (Add 6.25" for airlock and stopper)Width - 16.5"...

Easy Jiggler - Stainless Auto Siphon Racking Cane

$ 29.99 (Sold Out)

This jiggle siphon is made entirely of stainless steel and includes silicone tubing. Polycarbonate auto siphons are made from multiple pieces that easily crack and break after heavy use or if they're accidentally dropped on the floor. The stainless steel Easy Jiggler will last a lifetime and can be quickly disassembled for cleaning and sanitizing. The perfect option for siphoning...

Oxygen Regulator - Oxygenation System

$ 53.98

This kit comes with everything you need to oxygenate your wort with a disposable oxygen tank. This is the most effective to way to oxygenate your wort, it is much quicker and more efficient than air pump systems. The diffusion stone is .5 micron to ensure maximum dispersion of oxygen into your wort. using this setup, you should achieve adequate oxygen levels...

Dual Gauge Oxygen Regulator for Disposable Tanks

$ 39.99

Infusing your wort with pure oxygen immediately before pitching yeast is the best way to get your fermentation started faster and finished cleaner.This dual gauge oxygen regulator is compatible with standard disposable O2 tanks and provides a higher level of control when pumping oxygen into your wort. Using the adjustment knob, you can dial in the psi of the gas...

Compact Magnetic Stir Plate

$ 49.99

Improve the quality of your yeast starters with this compact magnetic stir plate. Aeration is an important factor in making a yeast starter, and without the stir plate you'll need to pick up and swirl your starter by hand as often as possible. Drop the included stir bar into your Erlenmeyer flask, set it on the stir plate, and let...

Wort Whipper Magnetic Stir Plate

$ 39.99

A magnetic stir plate is a great investment to help improve the quality of your yeast starters. Aeration is an important factor in making a yeast starter, and without a stir plate you'll need to pick up and swirl your starter by hand as often as possible. The stir plate is a simple solution that will continuously aerate your starter,...

BlowTie Diaphragm Spunding Valve Complete Kit

$ 34.99

With this complete kit you'll be ready to use the Blow Tie Spunding Valve right out of the box. The BlowTie is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and works much better at lower pressures....

BlowTie 2 Diaphragm Spunding Valve Kit

$ 29.99

This is the complete BlowTie2 spunding valve kit, comes setup with a ball lock disconnect, ready to use out of the box. The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and...

Stainless Steel Pressure Kit for FermZilla

$ 34.99

With the FermZilla Pressure Kit you can ferment under pressure, carbonate, and serve without ever needing to move your beer out of the fermenter. The kit inlcudes two stainless female threaded ball lock fittings with barbs, which thread onto the existing openings atop the FermZilla's lid. For the beverage out, you'll have a silicone dip tube with stainless steel float,...

Floating Dip Tube Filter Attachment

$ 3.99

How frustrating is it when hops cause blockage in your poppet, tap, ball valves, and practically everywhere else? This really handy little filter can be used with the Torpedo Keg Buoy or the floating dip tubes included with the Kegmenter and FermZilla Pressure Kit to prevent hops or other solids from getting sucked into the dip tube itself. The 304 stainless 80 mesh is fine enough...

Temp Twister Stainless Cooling / Chiller Coil

$ 39.99

The Temp Twister Cooling Coil is the ideal option for maintaining fermentation temperatures in any model FermZilla and also in many other commonly used fermentors. Use a Glycol Chiller or ice bath with submersible pump to push coolant through the coil when temps get too hot. Designed for the FermZilla but can be used with virtually any fermenter that has an opening...

Plastic Pressure Kit for FermZilla

$ 24.99

With the FermZilla Pressure Kit, you can ferment under pressure, carbonate, and serve without ever needing to move your beer out of the fermenter. The kit inlcudes two plastic female threaded ball lock fittings with barbs, which thread onto the existing openings atop the FermZilla's lid. For the beverage out, you'll have a silicone dip tube with stainless steel float,...