1/2" Barb x 1/2" FPT - Stainless

$ 4.99

Use this fitting for connecting tubing directly to your pump. 1/2" FPT on one side, with a 1/2" barb on the other.

1/2" Barb x 1/2" MPT - Stainless

$ 4.99

For insertion into stainless ball valve for connecting 1/2" ID line. Made from 304 Stainless Steel.

1/2" MPT Plug - Stainless

$ 3.99

Stainless 1/2 in MPT Plug. Hollow behind threads

1/2" NPT Lock Nut - Stainless

$ 3.99

These work great to make a weldless bulkhead when used in combination with our 1/2" stainless nipples.

1/2" x 1 1/2" Nipple - Stainless

$ 3.99 (Sold Out)

Open nipple because there is a 1/2" gap between the threads. Works for creating a weldless bulkhead 1 1/2" in length.

1/2" x 1" Nipple - Stainless

$ 3.49

Close nipple because there is no space between the threads. For connecting a 1/2'' ball valve to a union. 1" in length.

1/2" x 3/8" Elbow Barb MPT - Stainless

$ 4.99

Great for building mash tuns, recirc setups, whirlpool arms, etc.

1/4" Stainless Barb

$ 0.99

This stainless barb fits on our flared keg disconnects with a 1/4" swivel nut. Works with both pin lock and ball lock style kegs.

1/4" Swivel Nut - Flare Fitting

$ 0.99

This swivel nut fits with our flared keg disconnects, both ball lock and pin lock styles. We have both 1/4" and 3/8" barbs to use with these.

3/4" x 1" Nipple - Stainless

$ 4.99

Stainless Nipple - 3/4" x Close

3/8" Barb x 1/2" MPT - Stainless

$ 4.99

For insertion into stainless ball valve for connecting 3/8" ID line. Made from 304 Stainless Steel.

3/8" Barb x Garden Hose - Brass

$ 2.99

Useful piece for connecting tubing to a Wort Chiller. Female Garden Hose on one side, with a 3/8" OD barb for tubing on the other side.

3/8" Stainless Barb

$ 0.99

This stainless barb fits on our flared keg disconnects with a 1/4" swivel nut. Works with both pin lock and ball lock style kegs.

3/8" x 1" Nipple - Stainless

$ 1.99

These are typically used for connecting Ball Valves to couplers welded into tanks. “Close” thread means there is no space between the opposing threads

5/16" Barb x 1/4" FPT - Brass

$ 2.49

Useful for building specialty equipment and custom setups.

Anvil 21" Swirly - Whirlpool Arm

$ 29.00 (Sold Out)

This 21" whirlpool works perfectly with the 10.5 Gallon Foundry, brew kettles, and any other brewing system. The rotating rubber piece allows it to secure to the side of any vessel, no matter the thickness. The Swirly™ uses a 1/2" Straight Pipe Thread for hose connections and includes a hose barb for connecting your water supply. Patent pending. The 21"...

Ball Lock Beer Out All Stainless Disconnect

$ 16.49

Torpedo Stainless Steel keg disconnects are solid, heavy duty, and long lasting. This will be the last keg connector you will ever need to buy.  Very high quality, durable and rebuildable.

Ball Lock Beer Out Disconnect

$ 5.99

Black, beer out disconnect for ball lock style corny kegs of all sizes. Beer out disconnects are black, with barb for beverage line. Barb is 1/4". 1/4" or 5/16" beverage tubing is recommended for gas line.Tip N' Trick: Sometimes ball lock fittings are a challenge to quick disconnect "on and off" a cornelius keg. We recommend spraying the body connect on the keg first...

Ball Lock Beer Out Disconnect - Flared

$ 5.99

Black, beer out disconnect for ball lock style corny kegs of all sizes. Beer out disconnects are black. This disconnect has a male flared fitting for use with out swivel nuts and barbs, or our other attachments that require a male flare fitting.Tip N' Trick: Sometimes ball lock fittings are a challenge to quick disconnect "on and off" a cornelius keg. We recommend...

Ball Lock Beer Out Stainless Disconnect - Flared

$ 16.49 (Sold Out)

Torpedo Stainless Steel keg disconnects are solid, heavy duty, and long lasting. This will be the last keg connector you will ever need to buy.  Very high quality, durable and rebuildable.

Ball Lock Gas In All Stainless Disconnect

$ 16.49

Torpedo Stainless Steel keg disconnects are solid, heavy duty, and long lasting. This will be the last keg connector you will ever need to buy.  Very high quality, durable and rebuildable.

Ball Lock Gas In Disconnect

$ 5.99

Gray, gas in disconnect for ball lock style corny kegs of all sizes. Gas in disconnects are gray, with barb for gas line. Barb is 1/4". 1/4" or 5/16" beverage tubing is recommended for gas line.Tip N' Trick: Sometimes ball lock fittings are a challenge to quick disconnect "on and off" a cornelius keg. We recommend spraying the body connect on the...

Ball Lock Gas In Disconnect - Flared

$ 5.99

Gray, gas in disconnect for ball lock style corny kegs of all sizes. Gas in disconnects are gray. This disconnect has a male flared fitting for use with out swivel nuts and barbs, or our other attachments that require a male flare fitting.Tip N' Trick: Sometimes ball lock fittings are a challenge to quick disconnect "on and off" a cornelius keg. We recommend...

Ball Lock Gas In Stainless Disconnect - Flared

$ 16.49 (Sold Out)

Torpedo Stainless Steel keg disconnects are solid, heavy duty, and long lasting. This will be the last keg connector you will ever need to buy.  Very high quality, durable and rebuildable.

Ball Lock Keg Post - Beer Out

$ 6.99

A brand new beverage out body connect for ball-lock style kegs. These come with poppet and an o-ring. Fits with 7/8" socket. 19/32" - 18 pitch. Fit Cornelius Spartan & Super Champion.

Ball Lock Keg Post - Gas In

$ 6.99

The post where the ball lock is fitted onto. These are brand new connections. They come with one o-ring and poppet. 19/32" - 18 pitch. Fits Cornelius Spartan & Super Champion

Ball Lock Sanke Adapter - Gas

$ 13.99

This adapter allows you to connect your ball lock disconnects directly to a standard American sanke tap. This makes swapping between commercial kegs and corny kegs a breeze. No more having to loosen hose clamps and fuss with your tubing.  Just disconnect from your corny kegs and snap them right onto your sanke tap and let the beer flow.

Ball Lock Sanke Adapter - Liquid

$ 13.99

This adapter allows you to connect your ball lock disconnects directly to a standard American sanke tap. This makes swapping between commercial kegs and corny kegs a breeze. No more having to loosen hose clamps and fuss with your tubing.  Just disconnect from your corny kegs and snap them right onto your sanke tap and let the beer flow.

Beer & Gas Quick Connect - In-Line Set (With Shut-Off)

$ 14.99

Use these high quality, food-grade quick-disconnects on your gas and beer tubing lines. Uses might include the following: * On a gas system to unhook your tank and regulator from your manifold so you take it with you.* On a beer line to easily switch between ball lock, pin-lock, or a commercial tap* On a counter-pressure bottle filler to be...

Carbonating Keg Lid w/Diffusion Stone

$ 69.99

The easiest way to carbonate beer. This is a Cornelius keg lid with built-in carbonation stone! Move the lid from keg to keg to carbonate as needed. Allows you to force carbonate quickly using the attached .5 micron stone with the portability of being able to move the lid from keg to keg. No more hassles of trying to attach...

CIP Film Keg Lube 4 oz

$ 4.99

CIP Film is great for use with keg posts, clover clamp fittings, and any other brewery application where you need a little extra help. The bonus of the CIP Film is it can be removed with hot water more easily than LubriFilm, so clean up is simple and fast! FDA approved.

Corny Keg Lid Foot

$ 1.49

The foot for the swing arm on the keg lid. They are often missing on used kegs. NOTE: Product may be a different color from that pictured.

Corny Keg Lid O-Ring

$ 1.99

This is a replacement gasket for the large o-ring on your corny keg lid. These gaskets rarely wear out, but they do retain flavor, especially from old soda kegs. We recommend replacing gaskets on used corny kegs for this reason.

Dip Tube - Gas In

$ 4.99 (Sold Out)

This stainless steel dip tube is for the gas in side of your corny kegs. It will fit both pin lock and ball lock style kegs. Comes with dip tube o-ring installed, dip tube is approximately 2 inches long.

Dip Tube Replacement Gasket

$ 0.25

This is a direct replacement for the o-ring on the dip tubes in your corny kegs. Slide gasket onto dip tube and then place dip tube back in keg. 5/16" ID with a 7/64" cross section. Made of FDA BUNA N rubber.

Duotight Flow Stopper Automatic Keg Filler

$ 14.99 (Sold Out)

Use the Duotight Flow Stopper while filling kegs, during keg to keg transfers, or fermenter to keg transfers to automatically cut off the flow when the keg is full. Simply attach this device to the output gas post of your keg, then when the keg is full it will prevent further liquid exiting the gas post.   The Flow Stopper...

Duotight Push-In Bulkhead - 9.5 mm (3/8 in.) x 1/2 in. BSP

$ 3.49

This Duotight Bulkhead is the same one used for installing the Temp Twister cooling coil into the lid of the FermZilla. Allows you to add a bulkhead to just about anything that can then be connected to with EVABarrier 9.5 mm OD Tubing or 3/8" OD stainless or copper tubing.  Duotight fittings are high-quality push-in fittings that seal tight and offer...

Duotight Push-In Fitting - 6.5 mm (1/4 in.) x 8 mm (5/16 in.) Reducer

$ 1.49

This Duotight reducer fitting can be attached to the Intertap Short Shank with 1/4" Duotight compatible barb. Compatible with EVABarrier 8 mm OD Tubing. Also attaches to the Plastic Ball Lock Cap, allowing the cap to be used with 8 mm OD EVABarrier.   Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the...

Duotight Push-In Fitting - 8 mm (5/16 in.) Ball Valve

$ 2.99

This Duotight ball valve can be used as an inline shut-off valve on draft lines. Compatible with EVABarrier 8 mm OD Tubing.   Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design.   High-Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact...

Duotight Push-In Fitting - 8 mm (5/16 in.) Check Valve

$ 3.49

This Duotight check valve is a great idea for protecting your regulator. It has a low opening pressure of 1 psi, and since it cannot be opened or taken apart, it is recommended for gas applications only. The internal components are made from stainless steel. Compatible with EVABarrier 8 mm OD Tubing.   Duotight fittings are high-quality push-in fittings that...

Duotight Push-In Fitting - 8 mm (5/16 in.) Elbow

$ 1.99

This Duotight elbow fitting is compatible with EVABarrier 8 mm OD Tubing.   Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design.   High-Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. ...

Duotight Push-In Fitting - 8 mm (5/16 in.) Joiner

$ 1.99

This Duotight joiner fitting is compatible with EVABarrier 8 mm OD Tubing.   Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design.   High-Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. ...

Duotight Push-In Fitting - 8 mm (5/16 in.) Tee

$ 2.49

This Duotight fitting makes it easy to split your gas line and run it to multiple kegs. Use one tee for a dual tap kegerator or two tees for a triple tap. You can also pair the tee with the Push-In Pressure Gauge to use the gauge with the BlowTie Spunding Valve. Compatible with EVABarrier 8 mm OD Tubing.   Duotight fittings are...

Duotight Push-In Fitting - 8 mm (5/16 in.) x 1/4 in. BSP

$ 2.49

This Duotight fitting with 1/4" male thread is a great option for connecting gas line to regulators and manifolds that have 1/4" FPT. Comes with seated O-ring. Compatible with EVABarrier 8 mm OD Tubing.    Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design.   High-Performance Double O-Ring...

Duotight Push-In Fitting - 8 mm (5/16 in.) x 1/4 in. Flare

$ 2.99

This Duotight fitting with 1/4" Flare is perfect for flared gas and beverage ball lock and pin lock disconnects. It can also be used to connect gas line to the flare fitting found on the KOMOS® CO2 Regulator. Compatible with EVABarrier 8 mm OD Tubing.   The Duotight fitting does not require a flare washer. See the instructions below for how...

Duotight Push-In Fitting - 8 mm (5/16 in.) x 9.5 mm (3/8 in.) Reducer

$ 2.49

This Duotight reducer is used when stepping down from 9.5 mm OD to 8 mm OD EVABarrier tubing.   Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design.   High-Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one,...

Duotight Push-In Fitting - 8 mm (5/16 in.) x Female Beer Thread

$ 2.99

This Duotight to Female Beer Thread fitting can be used to connect beverage line to faucet shanks instead of a tailpiece, and it's also a convenient option for connecting gas and beverage line to the gas in and bev out on keg couplers. Compatible with EVABarrier 8 mm OD Tubing.   Duotight fittings are high-quality push-in fittings that seal tight...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) Ball Valve

$ 3.49

This Duotight ball valve can be used as an inline shut-off valve on beverage lines. Compatible with EVABarrier 9.5 mm OD tubing.   Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design.   High-Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) Check Valve

$ 3.49

This Duotight check valve is a great idea for protecting your regulator. It has a low opening pressure of 1 psi, and since it cannot be opened or taken apart, it is recommended for gas applications only. The internal components are made from stainless steel. Compatible with EVABarrier 9.5 mm OD tubing).  Duotight fittings are high-quality push-in fittings that seal...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) Elbow

$ 2.49

This Duotight elbow fitting is compatible with EVABarrier 9.5 mm OD tubing.   Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design.   High-Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings.  The...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) Joiner

$ 2.49

This Duotight joiner fitting is compatible with EVABarrier 9.5 mm OD tubing.   Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design.   High-Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings.  The...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) Tee

$ 2.49

This Duotight tee fitting is compatible with EVABarrier 9.5 mm OD tubing.   Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design.   High-Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings.  The...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 1/2 in. BSP

$ 2.49

This Duotight to 1/2" female thread fitting can be used to connect beverage or gas line to any fitting with 1/2" MPT. Compatible with EVABarrier 9.5 mm OD Tubing.   Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design.   High-Performance Double O-Ring Design: The secret to Duotight’s...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 1/2 in. BSP

$ 2.49

This Duotight fitting with 1/2" male thread is perfect for attaching to the Copper Counterflow Chiller and using with 1/2" female threaded Camlock and QD fittings. Compatible with EVABarrier 9.5 mm OD tubing.   Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design.   High-Performance Double O-Ring Design: The secret to Duotight’s superior...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 1/2 in. BSP Ball Valve

$ 3.49

This Duotight ball valve with 1/2" male thread is perfect for attaching to the water input on the Copper Counterflow Chiller, allowing you to adjust the water flow while chilling your wort. Compatible with EVABarrier 9.5 mm OD tubing.   Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 1/4 in. Flare

$ 2.99

This Duotight fitting with 1/4" Flare is perfect for flared gas ball lock and pin lock disconnects. Can also be used to connect gas line to the flare fitting found on the KOMOS® CO2 Regulator. Compatible with EVABarrier 9.5 mm OD tubing. Although this fitting would also fit a beverage disconnect, 9.5 mm OD EVABarrier is only recommended for beverage line in...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 3/4 in. BSP

$ 2.99

This Duotight to 3/4" female thread fitting can be used to connect beverage or gas line to any fitting with 3/4" MPT. Compatible with EVABarrier 9.5 mm OD Tubing.   Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design.   High-Performance Double O-Ring Design: The secret to Duotight’s...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) x Female Beer Thread

$ 3.49

This Duotight to Female Beer Thread fitting is perfect for connecting gas line to keg couplers. Although it could be used with 9.5 mm EVA Barrier as a beverage line, this would only be recommended for long draw systems where the beverage line will be 20-25 ft long. Compatible with EVABarrier 9.5 mm OD tubing. Duotight fittings are high-quality push-in fittings that seal...

Duotight Rigid Plastic Joiner - 8 mm

$ 0.99 (Sold Out)

This rigid joiner is made from strong polypropylene. It's useful to make rigid joins with push-in fittings that are dead straight. Although it's possible to make joins using short pieces of 8mm OD EVABarrier tubing, when mounting parts to a gas board or wall it will often make things much neater if you use these instead. The 50mm length is...

European Sanke Tap Stainless Keg Coupler - S-Style

$ 45.99

This adapter is used for many European brand kegs and is made from durable 304 stainless steel. The S - type coupling has beer dispensed out of the top port, and the side port is for gas. Also known as a keg coupler.This item does not come with a pressure relief valve.Will usually fit:Amstel, Amstel LightBeck's , Beck's Premier LightBelhaven...

FerMonster Carboy - Replacement Lid O-Ring

$ 2.99

Replacement O-ring for the Fermonster Plastic Carboy lids (all sizes use same lid).   The o-ring is a little tricky to install so please be sure to watch our video in the video tab on how to install it. 

Floating Dip Tube Filter Attachment

$ 3.99

How frustrating is it when hops cause blockage in your poppet, tap, ball valves, and practically everywhere else? This really handy little filter can be used with the Torpedo Keg Buoy or the floating dip tubes included with the Kegmenter and FermZilla Pressure Kit to prevent hops or other solids from getting sucked into the dip tube itself. The 304 stainless 80 mesh is fine enough...

ForgeFit® 1.5" Tri-Clamp Gasket (EPDM)

$ 1.49

EPDM gaskets have a more narrow temperature range than silicone gaskets, but they are more resistant to acids and caustic chemicals. For 1.5" tri-clamp fittings Made from EPDM Temperature rated from -30°F to 300°F ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by a 60-day no-hassle return policy and a one-year warranty.

ForgeFit® 1.5" Tri-Clamp Gasket (Silicone)

$ 1.49

Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals and may show signs of wear faster than EPDM gaskets. For 1.5" tri-clamp fittings Made from Silicone Temperature rated from -58°F to 446°F ForgeFit® is a brand of rugged, high-quality fittings made from certified...

ForgeFit® 1.5" Tri-Clamp Gasket (Teflon)

$ 2.49

Teflon gaskets have the widest temperature range but they can be harder to get a good seal when compared to silicone and EPDM. Teflon gaskets are primarily used where the fitting may need to be rotated in place, such as a rotating racking arm. For 1.5" tri-clamp fittings Made from Teflon Temperature rated from -100°F to 500°F ForgeFit® is a brand...

ForgeFit® CIP Spray Ball - 1.5" Tri-Clamp

$ 29.99

This clean-in-place spray ball is designed to attach to an independent CIP pipe inside a conical fermenter or brite tank. We recommend using it with a pump capable of 29 psi or higher. 1.5" tri-clamp Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by a 60-day...

ForgeFit® Stainless 1.5" Tri-Clamp 1/2" MPT

$ 14.99

Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place. Use this fitting to convert 1.5" tri-clamp to...

ForgeFit® Stainless 1.5" Tri-Clamp Elbow

$ 19.99

This elbow fitting features 1.5" tri-clamp connections at both ends and is made from high-quality stainless steel. 1.5" tri-clamp 90° bend 3.75" tall Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by a 60-day no-hassle return policy and a one-year warranty.

ForgeFit® Stainless 1.5" Tri-Clamp End Cap

$ 3.99

End caps are used to close off an open tri-clamp port where a valve is not wanted or needed. They're also great for capping butterfly valves when they won't be used for a while. Give your butterfly valve a quick spray with Alpet or Star San, then cap it off to ensure the interior space remains sanitary until the next...

ForgeFit® Stainless 1.5" Tri-Clamp Female Quick Disconnect

$ 14.99

Use this fitting to convert 1.5" tri-clamp to Female Quick Disconnect. This fitting is extremely useful when transferring wort from your brew kettle to a stainless fermenter with tri-clamp connections. If you already use male QDs on your transfer tubing, simply connect to this female QD x tri-clamp fitting, rather than having a specific length of transfer tubing with quick...

ForgeFit® Stainless 1.5" Tri-Clamp Male Quick Disconnect

$ 11.99

Use this fitting to convert 1.5" tri-clamp to Male Quick Disconnect. This fitting is extremely useful when transferring wort from your brew kettle to a stainless fermenter with tri-clamp connections. If you already use female QDs on your transfer tubing, simply connect to this male QD x tri-clamp fitting, rather than having a specific length of transfer tubing with quick...

ForgeFit® Stainless 1.5" Tri-Clamp Tee

$ 24.99

This tee fitting features 1.5" tri-clamp connections at all ends and is made from high-quality stainless steel. 1.5" tri-clamp 5.5" long x 3.75" tall Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by a 60-day no-hassle return policy and a one-year warranty.

ForgeFit® Stainless 1.5" Tri-Clamp x 1" Barb

$ 15.99

Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place. Use this barbed fitting to connect 1" ID...

ForgeFit® Stainless 1.5" Tri-Clamp x 1/2" Barb

$ 15.99

Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place. Use this barbed fitting to connect 1/2" ID...

ForgeFit® Stainless 1.5" Tri-Clamp x 1/2" FPT

$ 14.99 (Sold Out)

Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place. Use this fitting to convert 1.5" tri-clamp to...

ForgeFit® Stainless Butterfly Valve - 1.5" Tri-Clamp

$ 49.99

If you want to use the absolute best style of valve available to homebrewers, the butterfly valve is the clear choice. Brewers love butterfly valves because they are far and away the most sanitary option. Regular ball valves can trap small amounts of wort inside them, which inevitably leads to an infection that can sour your beer. That's why we...

ForgeFit® Stainless Tri-Clamp - 1.5" Clamp

$ 5.99

Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place. Use anywhere you want to make a sanitary...

ForgeFit® Stainless Tri-Clamp Concentric Reducer - 2" x 1.5"

$ 24.99

Adapt any 2" tri-clamp port or valve to work with an existing 1.5" tri-clamp fitting. The concentric design limits flow resistance as you step down from 2" T.C. to 1.5" T.C. 1.5" x 2" tri-clamp 3" tall Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed...

Gas Board for Duotight In-Line Regulators

$ 16.99

Keep your draft system dialed in with this regulator gas board for Duotight In-Line Regulators. The gas board can hold up to six regulators, allowing you to monitor and adjust the pressure going to each keg. In the example photo, the high pressure from the gas cylinder is fed to the regulator on the left, and then stepped down from there...

German Slider Keg Tap - A-Style

$ 49.99

For Paulaner or Spaten keg, this is an A-Type keg tap. Also known as a keg coupler, keg tap, coupling, or adapter. Both barbs measure 3/16" ID and 1/4" OD. Note: This coupler comes with nuts and barbs for the gas in and beverage out but you must attach them yourself. Also this coupler does not have a pressure relief valve.This...

Growler Filling Tube

$ 8.99

Fill your growlers, jug or bottles cleanly and quickly from your tap. Double o-ring design insures a clean and secure fit. Fills from the bottom to reduce foam and CO2 loss. Not Compatible with Perlick faucets.

Guinness Tap - U-Style Beer Tap

$ 114.99

A special tap that is required for Guinness kegs. U-Type Tap. Also known as a keg coupler, coupling, or adapter. Will Usually Fit:Abby WhiteBoddingtons Pub AleGuinness StoutHarpKilkennyLeffeMagnersSmithwicks Ale

High Temp O-Ring 3/4"

$ 0.49 (Sold Out)

These o-rings are made from silicone to withstand temperatures from -65 up to 450 degrees.  Dimensions - 3/4" ID and 1 1/4" OD These work great for weldless fittings or any hardware that will come in contact with hot or boiling liquids.

Hose Clamp - Large Stainless

$ 0.99 (Sold Out)

Perfect for 1/2" to 1" tubing.

Hose Clamp - Small EZ Turn

$ 0.99 (Sold Out)

Perfect for 3/16" to 3/8" tubing.

Hose Clamp - Small Stainless

$ 6.99

Perfect for 3/16" to 3/8" tubing.

Keg Gasket Rebuild Kit

$ 2.99

Includes two gaskets for the dip tubes, two for the body connects and one for the lid o-ring. Any keg that has been used for soda in the past should have its gaskets replaced because the soda flavor can never be removed from the rubber. These kits work for Ball lock and most Pin lock kegs.

Keg Parka - 2.5 gallon

$ 19.99 (Sold Out)

Keep your keg cool on the go with these durable neoprene keg parkas. Perfect for bringing a keg of your homebrew to parties! The insulated jacket keeps the keg cold and if you throw a couple of ice packs in between the jacket and the keg you can keep it cool even longer.

Keg Parka - 5 gallon

$ 24.99 (Sold Out)

Keep your keg cool on the go with these durable neoprene keg parkas. Perfect for bringing a keg of your homebrew to parties! The insulated jacket keeps the keg cold and if you throw a couple of ice packs in between the jacket and the keg you can keep it cool even longer.

Keg Post Replacement Gasket

$ 0.25

The gaskets on the body connects that the ball or pin lock fittings slide over. 7/16" ID with a 3/32" cross section. Made of FDA BUNA-N rubber.We also use this as a replacement for the smaller compression ring in our 1/2" Compression fittings so that you can create a snug fit in a Sanke keg conversion kit without permanently compressing...

Kettle Thermometer 3" Face x 2.5" Probe

$ 19.99

A great thermometer at a great price! These thermometers have a 3" Face, a 2.5" Probe, and a 1/2" MPT on the back. These are essentially plug and play with our deluxe and economy kettles with welded ports.    The 2.5" Probe works great in a boil kettle or hot liquor tank, however may be too short for a mash...

Kettle Thermometer 3" Face x 6" Probe

$ 19.99

A great thermometer at a great price! These thermometers have a 3" Face, a 6" Probe, and a 1/2" MPT on the back. These are essentially plug and play with our deluxe and economy kettles with welded ports.    The 6" Probe works great in a boil kettle, hot liquor tank or a mash tun. These thermometers have a calibration screw located...

Kettle Tube Screen

$ 18.99

The Kettle Tube is a rugged tube of stainless steel screen 12" in length, 1" in diameter, with a 1/2" MPT fitting at one end. This fitting will thread directly into the inside of our Deluxe Brew Kettles, Economy Kettles, or into the back of any of our line of Weldless Ball Valves, allowing you to better filter trub and whole...

KOMOS® Draft Multi Tool with Duotight Remover (7 in 1)

$ 4.99

The KOMOS multi-tool is a convenient instrument to keep nearby that is suitable for most of the fittings you'll encounter when setting up or making adjustments to your kegerator or keezer. If you're kegging your brew then you're well acquainted with the many nuts, bolts, and clamps it takes to rig up a draft system. Even small adjustments will often...

Krome Sanke Tap - D Style Coupler

$ 39.99

Krome Dispense American Sanke CouplersKrome Dispense couplers give you the best of both worlds—high quality product and exceptional value. Sanke Coupler Black Handle Yoke Brass Body

Krome Sanke Tap Low Profile - D Style Coupler

$ 49.99

Great for use where kinks in line are an issue or where keg stackers are used Keg type: D system (American Sanke) Gas inlet: 5/16” ID hose Beer outlet: 3/16” ID hose Body:  304 grade stainless steel Liquid contact: 304 grade stainless steel NSF listed

Krome Sanke Tap Picnic Pump - D Style Coupler

$ 54.99 (Sold Out)

Upright Picnic Pumps – American Sanke High Quality Long Lasting Trouble Free Out Performs most Pumps on the Market Krome Dispense 4″ Cylinder Plated forged brass body Nickel plated solid brass 4″ cylinder Built-in internal back-check valve Stainless Steel pump rod Black Lever 2′ length dispense tube with a self-closing plastic dispense faucet

New Corny Keg Lid w/ PRV

$ 16.99

This brand new corny keg lid fits both pin lock and ball lock style kegs. This lid has a manual PRV which most pin lock kegs do not come with. This is the perfect way to add a PRV to pin lock kegs or upgrade your ball lock keg lid. This lid comes with the rubber gasket as well.

Pin Lock Beer Out Disconnect - Barbed

$ 5.99

These disconnects fit pin lock style corny kegs of all sizes with 2 and 3 pin setups. They have a red body with black top to help distinguish beer out from gas in. Beer out connectors have 3 pins.

Pin Lock Beer Out Disconnect - Flared

$ 5.99

These disconnects fit pin lock style corny kegs of all sizes with 2 and 3 pin setups. They have a red body with black top to help distinguish beer out from gas in. Beer out connectors have 3 pins. 1/4'' male flare fitting for use with our hex nuts and barbs.

Pin Lock Gas In Disconnect - Barbed

$ 5.99

These disconnects fit pin lock style corny kegs of all sizes with 2 and 3 pin setups. They have a red body with grey base to help distinguish gas in from beer out. Gas in connectors have 2 pins. 

Pin Lock Gas In Disconnect - Flared

$ 5.99

These disconnects fit pin lock style corny kegs of all sizes with 2 and 3 pin setups. They have a red body with grey base to help distinguish gas in from beer out. Gas in connectors have 2 pins. 1/4'' male flare fitting for use with our hex nuts and barbs.

Pin Lock Keg Post - Beer Out

$ 14.99 (Sold Out)

This is a replacement keg post for pin-lock style corny kegs. It comes with a pop-it installed, and an the o-ring pictured. This is the beer out side of the keg, it has three pins. Made out of heavy duty stainless steel, built to last a life time.  19/32" - 18 pitch threads, fits most Cornelius Spartan & Super Champion kegs.

Pin Lock Keg Post - Gas In

$ 14.99 (Sold Out)

This is a replacement keg post for pin-lock style corny kegs. It comes with a pop-it installed, and an the o-ring pictured. This is the gas in side of the keg, it has two pins. Made out of heavy duty stainless steel, built to last a life time.  19/32" - 18 pitch threads, fits most Cornelius Spartan & Super Champion kegs.

Pin Lock Socket

$ 14.99 (Sold Out)

This specially cut socket is made to remove or tighten pin lock keg posts. Fits both gas in and beer out keg posts. This socket requires a 3/8" driver.

Poppet Replacement - Ball Lock

$ 3.99 (Sold Out)

These poppets are a replacement for ball lock style corny kegs. Fits most Firestone brand ball lock kegs. It will fit the Firestone V Challenger, VI Challenger and Super Challenger kegs. Each keg uses two poppets.

Pressure Relief Valve - Standard

$ 6.99

This is a replacement PRV unit for ball lock corny kegs. This is the most common relief valve. Fits most Cornelius and Firestone style kegs. Long body with spring with grey top and pull ring.

Quick Disconnect - Brass FPT

$ 12.99

This quick disconnect seals up very well without a lot of work in connecting them. This will work with any of our quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature pipe threads on the ends for easy connectivity to any traditional garden hoses or same size fittings. The quick disconnect...

Quick Disconnect - Brass MPT

$ 6.99

This quick disconnect seals up very well without a lot of work in connecting them. This will work with any of our quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature pipe threads on the ends for easy connectivity to any traditional garden hoses or same size fittings. The quick disconnect...

Quick Disconnect - Stainless Steel Female w/ Barb

$ 16.49

This quick disconnect seals up very well without a lot of work in connecting them. This will work with any of our quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature a 1/2" Barb on the ends for easy connectivity to any 1/2" tubing you may have. The quick disconnect...

Quick Disconnect - Stainless Steel FPT

$ 16.49

This quick disconnect seals up very well without a lot of work in connecting them. This will work with any of our quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature pipe threads on the ends for easy connectivity to any traditional garden hoses or same size fittings. The quick disconnect...

Quick Disconnect - Stainless Steel Male w/ Barb

$ 11.49

This quick disconnect seals up very well without a lot of work in connecting them. This will work with any of our quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature a 1/2" Barb on the ends for easy connectivity to any 1/2" tubing you may have. The quick disconnect...

Quick Disconnect - Stainless Steel MPT

$ 9.99

This quick disconnect seals up very well without a lot of work in connecting them. This will work with any of our quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature pipe threads on the ends for easy connectivity to any traditional garden hoses or same size fittings. The quick disconnect...

Sanke flare adapter

$ 4.99 (Sold Out)

Sanke Tap - D Style Coupler Stainless Steel Probe

$ 44.99 (Sold Out)

The most popular tap in the USA. Commercial D-Style Sanke Tap, also called a Coupler, with lock down mechanism that gives solid click when engaged. Built in pressure relief valve (50 p.s.I) for saftey. This tap is a brass body with a stainless steel probe.This item does not come with a tail piece, hex nut or gasket for dispensing beer out...

Sink Faucet Adapter

$ 3.99

This faucet adapter will connect your standard female garden hose fitting from your wort to chiller or bottle washer to most typical kitchen sink faucets. If you have any questions regarding fitment of the adapter to your specific sink, please contact us and we will try our best to help. We can't guarantee that this adapter will every sink.

SS BrewTech 1.5" Tri-Clamp Sight Gauge

$ 29.99 (Sold Out)

This is a 1.5 in. TC sight gauge. Its small compact design makes it easy to put inline anywhere during the brewing process. Made from 304 stainless steel and breaks down for easy cleaning. 2.2 in. long.

Stainless 3 Piece Ball Valve 1/2"

$ 16.99

This is our deluxe, heavy duty ball-valve that can be taken apart for easy cleaning. 1/2" female pipe thread inlet and outlet. Made from 304-type stainless steel.

Stainless Ball Valve 1/2" Full Port

$ 13.99

Our Ball Valves will last for years. Easy to clean. High grade 304-stainless made to last. 1/2" FPT on input and output side.TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and the two PTFE gaskets that form the seal when closed. To...

Stainless Steel Dry Hop Filter 2.75"x11.5" 300 Micron

$ 17.99

300 Micron Hop Filter w/ Lid This lidded, 300 micron stainless steel mesh cylinder is designed to filter dry hops in a keg, though it can be used as a boil filter as well. The tight stainless steel mesh holds the hop material in place but allows the hop oils to infuse into your beer, allowing plenty of opportunity to...

Stainless Steel Maximizer - 2.5 inch

$ 11.99

Draws liquid from the bottom of your kettle to get as much of your wort out as possible! 1/2 inch MPT thread fits into any of our Deluxe Heavy Duty kettles. Will only work if your kettle has a 1/2 inch FPT coupler on the inside of the kettle. Will not work with our domed false bottoms.Dimensions 2.5" Long -...

Stainless Steel Maximizer - 7 inch

$ 14.99

Draws liquid from the center of your kettle to get as much liquid out as possible. Has a 1/2 inch MPT fitting on the end that screws into the inside coupler of our Deluxe Heavy Duty kettles. Will only work if your kettle has a 1/2 inch FPT coupler on the inside of the kettle. Will not work with our...

Stainless Weldless 1/2" Ball Valve

$ 34.99

This is the best weldless ball valve design we have come across. These weldless fittings are designed for brewing. There is no comparison to the weldless fittings of the past with their rock-solid feel and a solid leak free connection. Perfect for DIY mash tuns or upgrading a kettle without welded ports. This unit is also unique in that it features 1/2" female threads...

Stainless Weldless Bulkhead - 1/2" FPT x 1/2" MPT

$ 16.99

This stainless steel bulkhead is 1/2" FPT x 1/2" MPT with a flat, thick rubber washer that makes is very easy to install on most kettles. We use this bulkhead on our weldless spigot.

Stainless Weldless Bulkhead 1/2" FPT x 1/2" FPT

$ 16.99

This stainless steel bulkhead is 1/2" FPT x 1/2" FPT with a flat, thick rubber washer that makes is very easy to install on most kettles.

Stainless Weldless Thermometer 3" Face x 2" Probe

$ 28.99

Upgrade any vessel and enjoy monitoring temperature from a safe distance! Gone are the days of opening kettle lids to check wort or mash temperatures!The Weldless Thermometer has a 2 inch probe, making it ideal for use in your Hot Liquor Tank or Boil Kettle. The 2 inch stem is much shorter than our 6 inch version, making this product...

Stainless Weldless Thermometer 3" Face x 6" Probe

$ 28.99

Upgrade any vessel and enjoy monitoring temperature from a safe distance! Gone are the days of opening kettle lids to check wort or mash temperatures!This Weldless Thermometer has a 6 inch probe, making it ideal for use in your mash tun. The 6 inch stem is positioned more towards the middle of the mash, giving the thermometer probe more exposure...

Taprite Commercial Sanke Tap - D Style Coupler

$ 54.99 (Sold Out)

The most popular tap in the USA. Commercial D-Style Sanke Tap, also called a Coupler, with lock down mechanism that gives solid click when engaged. Built in pressure relief valve (50 p.s.I) for saftey. Heavy duty construction is designed to withstand commercial usage. Beer is dispensed out of the top port, the side port is for gas. Manufactured by Taprite,...

Taprite European S-Style Tap

$ 39.99

This beer tap fits many European brand kegs with s - type connections. Beer is dispensed out of the top port, the side port is for gas. This style tap will work with Heineken, Amstel, Beck's, Lindemans, Stella, Newcastle, Murphy's and many others. This item does not come with a tail piece, hex nut or gasket for dispensing beer out of the...

Torpedo Keg Buoy™ Floating Dip Tube

$ 17.99

Draw the clearest beer possible from first pint to last with the Torpedo Buoy™ floating dip tube. Includes 3" metal dip tube, 23.5" length of 1/4" ID silicone tubing, and stainless steel ball float. Compatible with any ball lock or pin lock homebrew keg. Sized for 5-gallon kegs, but can be shortened for use with 1.5 or 2.5-gallon kegs.

Tri-Clamp 1.5" Sample Valve

$ 39.99

Polished, 304-Type stainless steel sample valve with 1.5in. Tri-Clamp connection.

Tri-Clamp 1.5" Sight Glass

$ 84.99

Made from 304-type stainless steel with 1.5in. clamp ends. Glass insert allows you to see flow. Note: 1.5 inch inner diameter flow.  Silicone seat for sight glass withstands high temps.

Universal Poppet

$ 3.99

A great way to repair your keg, even if you're not sure what type you have! This poppet works on all of the kegs that we sell, Pin or Ball lock! Poppets are pretty easy to damage or lose while cleaning your keg, and having a couple extra universal poppets on hand is a great way to make sure that...