Duotight Push-In Bulkhead - 9.5 mm (3/8 in.) x 1/2 in. BSP

$ 3.49

This Duotight Bulkhead is the same one used for installing the Temp Twister cooling coil into the lid of the FermZilla. Allows you to add a bulkhead to just about anything that can then be connected to with EVABarrier 9.5 mm OD Tubing or 3/8" OD stainless or copper tubing.  Duotight fittings are high-quality push-in fittings that seal tight and offer...

Duotight Push-In Fitting - 6.5 mm (1/4 in.) x 8 mm (5/16 in.) Reducer

$ 1.49

This Duotight reducer fitting can be attached to the Intertap Short Shank with 1/4" Duotight compatible barb. Compatible with EVABarrier 8 mm OD Tubing. Also attaches to the Plastic Ball Lock Cap, allowing the cap to be used with 8 mm OD EVABarrier.   Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the...

Duotight Push-In Fitting - 8 mm (5/16 in.) Ball Valve

$ 2.99

This Duotight ball valve can be used as an inline shut-off valve on draft lines. Compatible with EVABarrier 8 mm OD Tubing.   Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design.   High-Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact...

Duotight Push-In Fitting - 8 mm (5/16 in.) Check Valve

$ 3.49

This Duotight check valve is a great idea for protecting your regulator. It has a low opening pressure of 1 psi, and since it cannot be opened or taken apart, it is recommended for gas applications only. The internal components are made from stainless steel. Compatible with EVABarrier 8 mm OD Tubing.   Duotight fittings are high-quality push-in fittings that...

Duotight Push-In Fitting - 8 mm (5/16 in.) Elbow

$ 1.99

This Duotight elbow fitting is compatible with EVABarrier 8 mm OD Tubing.   Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design.   High-Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. ...

Duotight Push-In Fitting - 8 mm (5/16 in.) Joiner

$ 1.99

This Duotight joiner fitting is compatible with EVABarrier 8 mm OD Tubing.   Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design.   High-Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. ...

Duotight Push-In Fitting - 8 mm (5/16 in.) Tee

$ 2.49

This Duotight fitting makes it easy to split your gas line and run it to multiple kegs. Use one tee for a dual tap kegerator or two tees for a triple tap. You can also pair the tee with the Push-In Pressure Gauge to use the gauge with the BlowTie Spunding Valve. Compatible with EVABarrier 8 mm OD Tubing.   Duotight fittings are...

Duotight Push-In Fitting - 8 mm (5/16 in.) x 1/4 in. BSP

$ 2.49

This Duotight fitting with 1/4" male thread is a great option for connecting gas line to regulators and manifolds that have 1/4" FPT. Comes with seated O-ring. Compatible with EVABarrier 8 mm OD Tubing.    Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design.   High-Performance Double O-Ring...

Duotight Push-In Fitting - 8 mm (5/16 in.) x 1/4 in. Flare

$ 2.99

This Duotight fitting with 1/4" Flare is perfect for flared gas and beverage ball lock and pin lock disconnects. It can also be used to connect gas line to the flare fitting found on the KOMOS® CO2 Regulator. Compatible with EVABarrier 8 mm OD Tubing.   The Duotight fitting does not require a flare washer. See the instructions below for how...

Duotight Push-In Fitting - 8 mm (5/16 in.) x 9.5 mm (3/8 in.) Reducer

$ 2.49

This Duotight reducer is used when stepping down from 9.5 mm OD to 8 mm OD EVABarrier tubing.   Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design.   High-Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one,...

Duotight Push-In Fitting - 8 mm (5/16 in.) x Female Beer Thread

$ 2.99

This Duotight to Female Beer Thread fitting can be used to connect beverage line to faucet shanks instead of a tailpiece, and it's also a convenient option for connecting gas and beverage line to the gas in and bev out on keg couplers. Compatible with EVABarrier 8 mm OD Tubing.   Duotight fittings are high-quality push-in fittings that seal tight...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) Ball Valve

$ 3.49

This Duotight ball valve can be used as an inline shut-off valve on beverage lines. Compatible with EVABarrier 9.5 mm OD tubing.   Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design.   High-Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) Check Valve

$ 3.49

This Duotight check valve is a great idea for protecting your regulator. It has a low opening pressure of 1 psi, and since it cannot be opened or taken apart, it is recommended for gas applications only. The internal components are made from stainless steel. Compatible with EVABarrier 9.5 mm OD tubing).  Duotight fittings are high-quality push-in fittings that seal...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) Elbow

$ 2.49

This Duotight elbow fitting is compatible with EVABarrier 9.5 mm OD tubing.   Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design.   High-Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings.  The...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) Joiner

$ 2.49

This Duotight joiner fitting is compatible with EVABarrier 9.5 mm OD tubing.   Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design.   High-Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings.  The...