FermZilla Conical Fermenter - 7.1 gal. / 27 L

$ 129.99

The new and improved FermZilla in 27L brought to you by the critical minds and engineers behind the original Fermentasaurus Gen 1. Although the original Fermentasaurus was revolutionary at the time of its conception, there's always room for improvement. This is partly due to the strong community of Fermentasaurus users who have helped push for an improved conical unitank. The...

BlowTie Diaphragm Spunding Valve Complete Kit

$ 34.99

With this complete kit you'll be ready to use the Blow Tie Spunding Valve right out of the box. The BlowTie is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and works much better at lower pressures....

Stainless Steel Pressure Kit for FermZilla

$ 34.99

With the FermZilla Pressure Kit you can ferment under pressure, carbonate, and serve without ever needing to move your beer out of the fermenter. The kit inlcudes two stainless female threaded ball lock fittings with barbs, which thread onto the existing openings atop the FermZilla's lid. For the beverage out, you'll have a silicone dip tube with stainless steel float,...

FermZilla All Rounder Fermenter - 7.9 gal. / 30 L

$ 49.99 (Sold Out)

The FermZilla 30L All Rounder is the perfect fermentation vessel that can be used for fermenting under pressure, carbonating, and dispensing. It's far more capable than the FermZilla Flat bottom but it's less complicated and less expensive than the FermZilla Conical fermenter. The key differences are that the All Rounder can be pressurized, unlike the Flat Bottom, but it does...

BlowTie 2 Diaphragm Spunding Valve Kit

$ 29.99 (Sold Out)

This is the complete BlowTie2 spunding valve kit, comes setup with a ball lock disconnect, ready to use out of the box. The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and...

Temp Twister Stainless Cooling / Chiller Coil

$ 39.99

The Temp Twister Cooling Coil is the ideal option for maintaining fermentation temperatures in any model FermZilla and also in many other commonly used fermentors. Use a Glycol Chiller or ice bath with submersible pump to push coolant through the coil when temps get too hot. Designed for the FermZilla but can be used with virtually any fermenter that has an opening...

Duotight Push-In Fitting - 8 mm (5/16 in.) Check Valve

$ 3.49 (Sold Out)

This Duotight check valve is a great idea for protecting your regulator. It has a low opening pressure of 1 psi, and since it cannot be opened or taken apart, it is recommended for gas applications only. The internal components are made from stainless steel. Compatible with EVABarrier 8 mm OD Tubing.   Duotight fittings are high-quality push-in fittings that...

Thermowell Duotight Bulkhead for Fermzilla - 23.6 in.

$ 11.99

This stainless steel thermowell is your best option of monitoring temperatures in the 27L or 55L FermZilla or any other commonly used fermentor. Since the thermowell installs into the lid, the thermowell will be well-positioned in the middle of the fermenter to provide an accurate core temperature reading. On the bottom side of the FermZilla's lid you'll find several convenient...

Plastic Pressure Kit for FermZilla

$ 24.99

With the FermZilla Pressure Kit, you can ferment under pressure, carbonate, and serve without ever needing to move your beer out of the fermenter. The kit inlcudes two plastic female threaded ball lock fittings with barbs, which thread onto the existing openings atop the FermZilla's lid. For the beverage out, you'll have a silicone dip tube with stainless steel float,...

BlowTie 2 Diaphragm Spunding Valve with Gauge

$ 19.99 (Sold Out)

The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and works much better at lower pressures. The BlowTie 2 features an integrated pressure gauge so you can quickly and easily dial in...

Duotight Push-In Bulkhead - 9.5 mm (3/8 in.) x 1/2 in. BSP

$ 3.49

This Duotight Bulkhead is the same one used for installing the Temp Twister cooling coil into the lid of the FermZilla. Allows you to add a bulkhead to just about anything that can then be connected to with EVABarrier 9.5 mm OD Tubing or 3/8" OD stainless or copper tubing.  Duotight fittings are high-quality push-in fittings that seal tight and offer...

Duotight Push-In Fitting - 8 mm (5/16 in.) x 1/4 in. Flare

$ 2.99

This Duotight fitting with 1/4" Flare is perfect for flared gas and beverage ball lock and pin lock disconnects. It can also be used to connect gas line to the flare fitting found on the KOMOS® CO2 Regulator. Compatible with EVABarrier 8 mm OD Tubing.   The Duotight fitting does not require a flare washer. See the instructions below for how...

Collection Container for FermZilla

$ 13.99

If you're a FermZilla owner, we highly recommend picking up an additional collection container or two. Use one to harvest and store your yeast, and then a second for your dry hop additions. Or harvest and store multiple yeast cultures in multiple collection containers. The collection container features threaded ports that are compatible with the KG500 Ball Lock Cap. Attaching...

Duotight Push-In Fitting - 8 mm (5/16 in.) Joiner

$ 1.99

This Duotight joiner fitting is compatible with EVABarrier 8 mm OD Tubing.   Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design.   High-Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. ...

Duotight Push-In Fitting - 8 mm (5/16 in.) Ball Valve

$ 2.99

This Duotight ball valve can be used as an inline shut-off valve on draft lines. Compatible with EVABarrier 8 mm OD Tubing.   Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design.   High-Performance Double O-Ring Design: The secret to Duotight’s superior sealing performance comes from the fact...