High Temp O-Ring 3/4"

$ 0.49 (Sold Out)

These o-rings are made from silicone to withstand temperatures from -65 up to 450 degrees.  Dimensions - 3/4" ID and 1 1/4" OD These work great for weldless fittings or any hardware that will come in contact with hot or boiling liquids.

Kettle Thermometer 3" Face x 2.5" Probe

$ 19.99

A great thermometer at a great price! These thermometers have a 3" Face, a 2.5" Probe, and a 1/2" MPT on the back. These are essentially plug and play with our deluxe and economy kettles with welded ports.    The 2.5" Probe works great in a boil kettle or hot liquor tank, however may be too short for a mash...

Kettle Thermometer 3" Face x 6" Probe

$ 19.99

A great thermometer at a great price! These thermometers have a 3" Face, a 6" Probe, and a 1/2" MPT on the back. These are essentially plug and play with our deluxe and economy kettles with welded ports.    The 6" Probe works great in a boil kettle, hot liquor tank or a mash tun. These thermometers have a calibration screw located...

Kettle Tube Screen

$ 18.99

The Kettle Tube is a rugged tube of stainless steel screen 12" in length, 1" in diameter, with a 1/2" MPT fitting at one end. This fitting will thread directly into the inside of our Deluxe Brew Kettles, Economy Kettles, or into the back of any of our line of Weldless Ball Valves, allowing you to better filter trub and whole...

Large Muslin Grain Bag - 5" x 28"

$ 0.69

These muslin grain bags are perfect for steeping grains in a partial mash brew or a small brew in a bag recipe.  These bags can hold up to 5 pounds of grain.

Plastic Paddle 18"

$ 2.99

Plastic paddle perfect for stirring small batches of wort. The handle end fits into glass carboy openings. Plastic is heat resistant to 360º F.

Plastic Paddle 28"

$ 3.99

Plastic paddle perfect for stirring large batches of wort. The handle end fits into glass carboy openings. Plastic is heat resistant to 360º F.

Plastic Spoon 18"

$ 2.99

Plastic spoon perfect for stirring small batches of wort. Handle end fits in glass carboy opening. Plastic is heat resistant to 360º F.

Plastic Spoon 28"

$ 3.99

Plastic spoon perfect for stirring large batches of wort. Handle end fits in glass carboy opening. Plastic is heat resistant to 360º F.

Small Muslin Hop Bag - 5" x 11"

$ 0.49

These muslin hop bags are perfect for boiling your hops so there is less hop sediment to drain. They are also work great for dry hopping or adding other spices in your secondary. These bags can hold up to 3 ounces of hops.

Stainless 3 Piece Ball Valve 1/2"

$ 16.99

This is our deluxe, heavy duty ball-valve that can be taken apart for easy cleaning. 1/2" female pipe thread inlet and outlet. Made from 304-type stainless steel.

Stainless Ball Valve 1/2" Full Port

$ 13.99

Our Ball Valves will last for years. Easy to clean. High grade 304-stainless made to last. 1/2" FPT on input and output side.TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and the two PTFE gaskets that form the seal when closed. To...

Stainless Steel Kettle Filter 6"x14" 400 Micron

$ 39.99

Stainless Steel Hop Filter - 400 micron 6" x 14" This hop filter is made of 400 micron stainless steel mesh and features tabs on the rim to attach to the side of a kettle and a strip across the top to serve as a handle. With a capacity of 254 cubic inches, this filter is great for using with...

Stainless Steel Maximizer - 2.5 inch

$ 11.99

Draws liquid from the bottom of your kettle to get as much of your wort out as possible! 1/2 inch MPT thread fits into any of our Deluxe Heavy Duty kettles. Will only work if your kettle has a 1/2 inch FPT coupler on the inside of the kettle. Will not work with our domed false bottoms.Dimensions 2.5" Long -...

Stainless Steel Maximizer - 7 inch

$ 14.99

Draws liquid from the center of your kettle to get as much liquid out as possible. Has a 1/2 inch MPT fitting on the end that screws into the inside coupler of our Deluxe Heavy Duty kettles. Will only work if your kettle has a 1/2 inch FPT coupler on the inside of the kettle. Will not work with our...