AAA TRI CLAMP FITTINGS & PARTS | Hop Craft Supply Co.

ForgeFit® 1.5" Tri-Clamp Gasket (Teflon)

$ 2.49

Teflon gaskets have the widest temperature range but they can be harder to get a good seal when compared to silicone and EPDM. Teflon gaskets are primarily used where the fitting may need to be rotated in place, such as a rotating racking arm. For 1.5" tri-clamp fittings Made from Teflon Temperature rated from -100°F to 500°F ForgeFit® is a brand...

Add to wishlist

ForgeFit® Stainless Tri-Clamp - 1.5" Clamp

$ 5.99

Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place. Use anywhere you want to make a sanitary...

Add to wishlist

ForgeFit® Stainless 1.5" Tri-Clamp 1/2" MPT

$ 14.99

Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place. Use this fitting to convert 1.5" tri-clamp to...

Add to wishlist

ForgeFit® Stainless 1.5" Tri-Clamp x 1/2" FPT

$ 14.99

Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place. Use this fitting to convert 1.5" tri-clamp to...

Add to wishlist

ForgeFit® 1.5" Tri-Clamp Gasket (EPDM)

$ 1.49

EPDM gaskets have a more narrow temperature range than silicone gaskets, but they are more resistant to acids and caustic chemicals. For 1.5" tri-clamp fittings Made from EPDM Temperature rated from -30°F to 300°F ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by a 60-day no-hassle return policy and a one-year warranty.

Add to wishlist

ForgeFit® 1.5" Tri-Clamp Gasket (Silicone)

$ 1.49

Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals and may show signs of wear faster than EPDM gaskets. For 1.5" tri-clamp fittings Made from Silicone Temperature rated from -58°F to 446°F ForgeFit® is a brand of rugged, high-quality fittings made from certified...

Add to wishlist

Tri-Clamp 1.5" TC x 1.5" MPT

$ 24.99 (Sold Out)

1"/1.5" Tri Clover Compatible X 1.5" Male NPT. Based on the 1"/1.5" Tri Clover Compatible flange, this adapter adapts 1.5" Male NPT threads to a 1" or 1.5" Tri Clover Compatible fitting. This is a popular fitting to attach a Tri Clover Compatible butterfly valve to the bottom of many of the plastic conical tanks out there.

Add to wishlist

Tri-Clamp 1.5" TC x 1" MPT

$ 12.99

Add to wishlist

ForgeFit® Stainless 1.5" Tri-Clamp x 1" Barb

$ 15.99

Tri-clamp fittings are the gold standard in professional breweries and they've been widely adopted in homebrewing as T.C. kettles, fermenters, and pumps become more widely available. Tri-clamp fittings allow you to make a sanitary connection without any nooks or crannies for contaminants to hide in and they can be cleaned in place. Use this barbed fitting to connect 1" ID...

Add to wishlist

SS BrewTech 1.5" Tri-Clamp Sight Gauge

$ 29.99

Add to wishlist

ForgeFit® CIP Spray Ball - 1.5" Tri-Clamp

$ 29.99

This clean-in-place spray ball is designed to attach to an independent CIP pipe inside a conical fermenter or brite tank. We recommend using it with a pump capable of 29 psi or higher. 1.5" tri-clamp Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed by a 60-day...

Add to wishlist

ForgeFit® Stainless Tri-Clamp Concentric Reducer - 2" x 1.5"

$ 24.99

Adapt any 2" tri-clamp port or valve to work with an existing 1.5" tri-clamp fitting. The concentric design limits flow resistance as you step down from 2" T.C. to 1.5" T.C. 1.5" x 2" tri-clamp 3" tall Made from 304 stainless steel ForgeFit® is a brand of rugged, high-quality fittings made from certified 304 stainless steel. Each fitting is backed...

Add to wishlist

Tri-Clamp 1.5" TC x 1" FPT

$ 12.99

Add to wishlist

Tri-Clamp 1.5" TC x 3/4" FPT BSPP

$ 19.99

Convert 3/4" BSPP (Straight Thread) fittings to 1.5" Tri-Clover. Often used on 20x20 plate filters, where the stock 3/4" barbed inlet and outlet fittings are replaced with these to convert to 1.5" Tri-Clover. Use along with our H928 o-ring to form a seal on the straight threads.

Add to wishlist

Tri-Clamp 1.5" TC x 3/4" MPT Full Port

$ 13.99

Add to wishlist

Sequoia™ Pellet Hops 1 Ounce (2020)

Zamba™ Pellet Hops 1 Ounce (2020)

Trident™ Pellet Hops 1 Ounce (2020)

Strata Pellet Hops 1 Ounce (2020)

ForgeFit® 1.5" Tri-Clamp Gasket (Teflon)

ForgeFit® Stainless Tri-Clamp - 1.5" Clamp

ForgeFit® Stainless 1.5" Tri-Clamp 1/2" MPT

ForgeFit® Stainless 1.5" Tri-Clamp x 1/2" FPT

ForgeFit® 1.5" Tri-Clamp Gasket (EPDM)

ForgeFit® 1.5" Tri-Clamp Gasket (Silicone)

Tri-Clamp 1.5" TC x 1.5" MPT

Tri-Clamp 1.5" TC x 1" MPT

ForgeFit® Stainless 1.5" Tri-Clamp x 1" Barb

SS BrewTech 1.5" Tri-Clamp Sight Gauge

ForgeFit® CIP Spray Ball - 1.5" Tri-Clamp

ForgeFit® Stainless Tri-Clamp Concentric Reducer - 2" x 1.5"

Tri-Clamp 1.5" TC x 1" FPT

Tri-Clamp 1.5" TC x 3/4" FPT BSPP

Tri-Clamp 1.5" TC x 3/4" MPT Full Port

Recently Viewed