Sink Faucet Adapter

$ 3.99

This faucet adapter will connect your standard female garden hose fitting from your wort to chiller or bottle washer to most typical kitchen sink faucets. If you have any questions regarding fitment of the adapter to your specific sink, please contact us and we will try our best to help. We can't guarantee that this adapter will every sink.

1/2" Barb x 1/2" MPT - Stainless

$ 4.99

For insertion into stainless ball valve for connecting 1/2" ID line. Made from 304 Stainless Steel.

Stainless Weldless 1/2" Ball Valve

$ 34.99

This is the best weldless ball valve design we have come across. These weldless fittings are designed for brewing. There is no comparison to the weldless fittings of the past with their rock-solid feel and a solid leak free connection. Perfect for DIY mash tuns or upgrading a kettle without welded ports. This unit is also unique in that it features 1/2" female threads...

3/8" Barb x 1/2" MPT - Stainless

$ 4.99

For insertion into stainless ball valve for connecting 3/8" ID line. Made from 304 Stainless Steel.

1/2" x 3/8" Elbow Barb MPT - Stainless

$ 4.99

Great for building mash tuns, recirc setups, whirlpool arms, etc.

1/2" NPT Lock Nut - Stainless

$ 3.99

These work great to make a weldless bulkhead when used in combination with our 1/2" stainless nipples.

1/2" Barb x 1/2" FPT - Stainless

$ 4.99

Use this fitting for connecting tubing directly to your pump. 1/2" FPT on one side, with a 1/2" barb on the other.

Quick Disconnect - Stainless Steel MPT

$ 9.99

This quick disconnect seals up very well without a lot of work in connecting them. This will work with any of our quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature pipe threads on the ends for easy connectivity to any traditional garden hoses or same size fittings. The quick disconnect...

Stainless Ball Valve 1/2" Full Port

$ 13.99

Our Ball Valves will last for years. Easy to clean. High grade 304-stainless made to last. 1/2" FPT on input and output side.TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and the two PTFE gaskets that form the seal when closed. To...

Quick Disconnect - Stainless Steel Female w/ Barb

$ 16.49

This quick disconnect seals up very well without a lot of work in connecting them. This will work with any of our quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature a 1/2" Barb on the ends for easy connectivity to any 1/2" tubing you may have. The quick disconnect...

1/2" x 1 1/2" Nipple - Stainless

$ 3.99 (Sold Out)

Open nipple because there is a 1/2" gap between the threads. Works for creating a weldless bulkhead 1 1/2" in length.

1/2" x 1" Nipple - Stainless

$ 3.49

Close nipple because there is no space between the threads. For connecting a 1/2'' ball valve to a union. 1" in length.

Stainless Weldless Bulkhead 1/2" FPT x 1/2" FPT

$ 16.99

This stainless steel bulkhead is 1/2" FPT x 1/2" FPT with a flat, thick rubber washer that makes is very easy to install on most kettles.

Stainless Weldless Bulkhead - 1/2" FPT x 1/2" MPT

$ 16.99

This stainless steel bulkhead is 1/2" FPT x 1/2" MPT with a flat, thick rubber washer that makes is very easy to install on most kettles. We use this bulkhead on our weldless spigot.

1/2" MPT Plug - Stainless

$ 3.99

Stainless 1/2 in MPT Plug. Hollow behind threads