Blichmann Engineering RipTide™ Brewing Pump

(Sold Out)

Gone are the days of making do with a general purpose pump such as the March 815 and all the variant imported copies. These pumps are cumbersome to disassemble, difficult to prime to get the wort moving, require the addition of a valve, a switch, and a proper base to hold the pump upright. They also use noisy open motors...

MKII High Temp Magnetic Drive Pump

(Sold Out)

This magnetic drive pump from Keg King is a perfect pump for your brew system. Use it to move hot wort in an all-grain system and also to transfer wort from boil kettle to fermenter. The housing of the unit is made from tough, food grade polysulfone. The magnetic drive allows you to slow down the flow without damaging the...

Anvil Recirculation Pump Kit

(Sold Out)

Key Features: Anvil Recirculation Pump 4 ft. of Silicone Hose 4 Hose Clamps Flow Clamp Stainless Return Tube Perforated Disc Eye Bolt & Nuts for Eye Bolt

Super Sucker Transfer Pump

(Sold Out)

Transfer beer or wine between vessels without the hassle of starting a siphon Place your receiving vessel side-by-side or even above the transferring vessel Perfect for transferring between primary and secondary fermenter, or from fermenter to bottling bucket or keg Eliminate excess oxygen exposure caused by hand-pumping or blowing into a carboy hood to start a siphon The Super Sucker...

Chugger Pump - Inline Stainless Steel

(Sold Out)

Chugger SS Inline Chugger-SS Inline Pump is typically used for homebrewing. It is a booster pump designed to transfer hot and cold liquids. It is not a self-priming pump so DO NOT RUN DRY! The Chugger Pump head must be flooded with liquid prior to turning on the pump. The Chugger-SS Inline is comparable to the March LC-3CP-MD 3 Series...

Chugger Pump - Inline Plastic

(Sold Out)

Chugger PP Inline Chugger-PP Inline Pump is a homebrew pump used to transfer hot and cold liquids to or from the brewing vessel. The Chugger-PP Inline Pump is comparable to the March LC-3CP-MD 3 Series Pump. It is not self-priming so DO NOT RUN DRY! Inlet 1/2"" MPT Outlet 1/2""MPT Polysulfone (Front Housing), 316 Stainless Steel (Rear Housing), Teflon (Thrust...

MKII Stainless Pump Head Upgrade


Upgrade your MKII pump from Keg King with a 304 stainless steel replacement head. Stainless steel is more durable if you are attaching ball valves. Very cccasionally the threads on the plastic head that comes standard on the MKII can break if you are using hard to close ball valves that apply a lot of torque. Stainless steel is very...