BlowTie 2 Diaphragm Spunding Valve Kit

$29.99

This is the complete BlowTie2 spunding valve kit, comes setup with a ball lock disconnect, ready to use out of the box. The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and...

BlowTie 2 Diaphragm Spunding Valve with Gauge

$19.99

The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and works much better at lower pressures. The BlowTie 2 features an integrated pressure gauge so you can quickly and easily dial in...

BlowTie Diaphragm Spunding Valve Complete Kit

$34.99

With this complete kit you'll be ready to use the Blow Tie Spunding Valve right out of the box. The BlowTie is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and works much better at lower pressures....

Collection Container for FermZilla

$19.99

If you're a FermZilla owner, we highly recommend picking up an additional collection container or two. Use one to harvest and store your yeast, and then a second for your dry hop additions. Or harvest and store multiple yeast cultures in multiple collection containers. The collection container features threaded ports that are compatible with the KG500 Ball Lock Cap. Attaching...

Digital Mini Pressure Gauge (0-90 psi)

(Sold Out)

Get instant pressure reads with the back-illuminated Digital Mini Pressure Gauge from KegLand. Swap out the analog pressure gauge on your Core 360 Mini CO2 Regulator, BlowTie 2 Spunding Valve, or Duotight In-Line Regulator. With a 0-90 psi pressure range, the Digital Mini Gauge is suitable for a wide range of applications. KegLand has developed the world's most compact mini...

Digital Mini Pressure Gauge (0-90 psi) - 8 mm Duotight Compatible

$14.99

Get instant pressure reads with the back-illuminated Digital Mini Pressure Gauge from KegLand. Compatible with 8 mm Duotight fittings and Gray Ball Lock QDs. If you're using the original BlowTie spunding valve without a pressure gauge, you can use a Duotight tee fitting in-line between the ball lock QD and the BlowTie to take pressure readings with the Digital Mini Gauge....

Duotight Push-In Bulkhead - 9.5 mm (3/8 in.) x 1/2 in. BSP

$3.49

This Duotight Bulkhead is the same one used for installing the Temp Twister cooling coil into the lid of the FermZilla. Allows you to add a bulkhead to just about anything that can then be connected to with EVABarrier 9.5 mm OD Tubing or 3/8" OD stainless or copper tubing.  Duotight fittings are high-quality push-in fittings that seal tight and offer...

FermZilla All Rounder Fermenter - 7.9 gal. / 30 L

$78.99

The FermZilla 30L All Rounder is the perfect fermentation vessel that can be used for fermenting under pressure, carbonating, and dispensing. It's far more capable than the FermZilla Flat bottom but it's less complicated and less expensive than the FermZilla Conical fermenter. The key differences are that the All Rounder can be pressurized, unlike the Flat Bottom, but it does...

FermZilla Conical Fermenter - 7.1 gal. / 27 L

$159.99

The new and improved FermZilla in 27L brought to you by the critical minds and engineers behind the original Fermentasaurus Gen 1. Although the original Fermentasaurus was revolutionary at the time of its conception, there's always room for improvement. This is partly due to the strong community of Fermentasaurus users who have helped push for an improved conical unitank. The...

Floating Dip Tube Filter Attachment

(Sold Out)

How frustrating is it when hops cause blockage in your poppet, tap, ball valves, and practically everywhere else? This really handy little filter can be used with the Torpedo Keg Buoy or the floating dip tubes included with the Kegmenter and FermZilla Pressure Kit to prevent hops or other solids from getting sucked into the dip tube itself. The 304 stainless 80 mesh is fine enough...

Insulating Jacket for 27L FermZilla

(Sold Out)

Use this insulating jacket to regulate the fermentation temperature in your 27L FermZilla. The jacket alone will help keep your fermenter warm in the colder months, or you can add a FermWrap heater if the heat fermentation isn't enough to maintain temp. Conversely, you can freeze bottles of water and put them inside the jacket to keep the temperature from getting too...

Plastic Ball Lock Pressure Cap

(Sold Out)

Fermenting with the FermZilla? This is the same ball lock fitting included with the FermZilla Pressure Kit and it's also compatible with the FermZilla Collection Container. If you use the collection container to add dry hops, attach one of these caps and you'll be able purge the container of oxygen before opening the dump valve to introduce the hops. Attach some...

Plastic Pressure Kit for FermZilla

$24.99

With the FermZilla Pressure Kit, you can ferment under pressure, carbonate, and serve without ever needing to move your beer out of the fermenter. The kit inlcudes two plastic female threaded ball lock fittings with barbs, which thread onto the existing openings atop the FermZilla's lid. For the beverage out, you'll have a silicone dip tube with stainless steel float,...

Replacement Floating Dip Tube for FermZilla

$14.99

Direct replacement of the 31" floating dip tube included with the FermZilla Pressure Kits. If you're looking for a floating dip tube to use with your homebrew keg, we recommend the Torpedo Buoy™, which includes an appropriately sized metal dip tube and features a higher quality silicone tubing.

Stainless Ball Lock Pressure Cap

$9.99

This is a direct replacement to ball lock fittings included with the FermZilla pressure kit. It can also be attached to the FermZilla collection container, enabling you to purge the collection container of oxygen. This stainless steel ball lock cap features soda bottle threads, allowing you to convert a soda bottle into a pressurizable growler. It is compatible with both...